Multi-tech-systems MT2834MR6 Instrukcja Użytkownika Strona 102
- Strona / 123
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
102
Appendix
$MBn n
= speed Modem Baud Rate
$MB75 Select ITU-T V.23 mode.
$MB300 Select 300 bps on line.
$MB1200 Select 1200 bps on line.
$MB2400 Select 2400 bps on line.
$MB4800 Select 4800 bps on line.
$MB7200 Select 7200 bps on line.
$MB9600 Select 9600 bps on line.
$MB12000 Select 12,000 bps on line.
$MB14400 Select 14,400 bps on line.
$MB16800 Select 16,800 bps on line.
$MB19200 Select 19,200 bps on line.
$MB28800 Select 28,800 bps on line.
*** $MB33600 Select 33,600 bps on line.
Nd d
= 0 or 1 Dial a Stored Number
Dial stored telephone number
d
.
NdNe... d
= 0 or 1 Number Linking
e
= 1 or 0 Dial stored number
d
; if that is busy, dial stored number
e
. The command may be
extended N
d
N
e
N
d
N
e
... to cycle between the two numbers.
O
n/a Go Back On Line
Exit command mode and go into online mode after using the escape code to do the
reverse.
P
In dialing *** Pulse-Dial
command Modem pulse-dials numbers that follow P.
&Pn n
= 0 or 1 Set Pulse Dial Ratios
*** &P0 60:40 pulse ratio.
&P1 67:33 pulse ratio.
Note:The ZDXK is locked to &P1, a 67:33 ratio.
Qn n
= 0–2 Result Codes Enable/Disable
*** Q0 Result codes sent.
Q1 Result codes suppressed (quiet).
Q2 No Response answer mode.
&Qn n
= 0 or 1 Result Codes (Multi-Tech or Standard AT)
*** &Q0 Multi-Tech responses with modifiers.
&Q1 Standard AT responses with no modifiers.
Rn n
= 0 or 1 Reverse Originate/Answer Mode
*** R0 Modem will not reverse modes.
R1 Modem will reverse modes when R is added to dial string.
&Rn n
= 0, 1, or 2 Clear to Send Control
&R0 Let CTS state follow RTS state when online.
*** &R1 Force CTS high (on).
&R2 Let CTS drop on disconnect for time set by S24, then go high again.
&RAn n
= 0 or 1 Asymmetric Bit Rate
*** &RA0 Enable asymmetric bit rate operation.
&RA1 Disable asymmetric bit rate operation.
&RDn n
= 0 or 1 Square Wave Ring Detect
&RD0 Full wave ring detect only.
*** &RD1 Full wave and square wave ring detect.
- User Guide 1
- Revision Date Description 2
- Contents 3
- 1.1 Introduction 8
- 1.2 Manual Organization 8
- 1.3 Description 9
- 1.4.1 FCC Fax Update 10
- Chapter 1 - Introduction 11
- 1.6 Technical Specifications 12
- 1.7 Power Supply 14
- 1.8 Modem LED Indicators 15
- 1.9 Busy Switch 15
- 1.11 Safety Warnings 16
- 2.1 Introduction 18
- 2.4 Call Termination 19
- Chapter 3 - AT Commands 20
- 3.1 Working with AT Commands 21
- 3.2.2 Command Structure 22
- 3.3.3 Command Editing 22
- &RA Asymmetric bit rate 24
- 3.2 Dialing Commands 26
- 3.3 Dial Modifier Commands 27
- 3.8 V.34 Commands 40
- 3.9 RS-232 Interface Commands 41
- 3.12 Flow Control Commands 49
- 3.13 Escape Sequences 52
- 3.15 Line Probe Commands 54
- 3.16 Diagnostic Commands 55
- Chapter 4 - S-Registers 56
- 4.1 Introduction 57
- 4.2 S-Registers 57
- Chapter 5 - Error Correction 65
- 5.1 Introduction 66
- 5.3 Data Compression 68
- 5.4 MNP Classes 68
- 5.6 Modes of Operation 70
- 5.7 Flow Control 71
- 5.8.1 XON/XOFF Flow Control ( 72
- 5.8.2 Hardware Flow Control ( 72
- &E13 73
- (autoreliable mode) or 74
- 5.11 Result Codes 75
- 5.12 Speed Conversion 75
- 5.12.1 Baud Adjust ( 76
- 5.12.2 Modem Baud Rate ($MB) 76
- 5.13 Related Commands 78
- 5.14 Summary 79
- 6.1 Introduction 81
- 6.2.1 Test Procedure 82
- 6.3.1 Test Procedure 83
- 6.4.1 Test Procedure 84
- 7.1.1 Warranty 86
- 7.2 Repairs 88
- 7.3 Technical Support 89
- 7.4 Internet Site 89
- Appendices 90
- Appendix A 91
- 92
- Tone Dial Frequencies 93
- Appendix C 94
- Appendix D 96
- Appendix E 98
- Appendix 100
- Appendix F 106
- Appendix G 110
- APPENDIX H 111
- Aborting an Escape Sequence 113
- APPENDIX I 114
- Changing the Passwords 115
- S000326A 123
Powiązane produkty i podręczniki dla Sprzęt komputerowy Multi-tech-systems MT2834MR6
(35 strony)Behringer ULTRAGRAPH PRO FBQ1502 manuels
Manuels d'utilisation et guides de l'utilisateur pour Lecteurs de DVD Behringer ULTRAGRAPH PRO FBQ1502.
Nous fournissons des manuels en pdf Behringer ULTRAGRAPH PRO FBQ1502 à télécharger gratuitement par type de document :
Komentarze do niniejszej Instrukcji