Multi-tech-systems MT5600ZDX Instrukcja Użytkownika Pobierz pdf (Strona 44)

Model MT5600ZDX

S-Registers

Certain Command Mode configurations are stored in memory registers

called, S-Registers. The S command is used to assign a value to, and to

read the current value of an S-Register. To assign a value to an S-Register,

enter the letter S, followed by the S-Register number and an equals sign

(=). To read an S-Register value, enter the letter S followed by the S-

the S-Register value was entered correctly, enter for example, ATS8? and

hit RETURN. You should receive a response of the assigned value given to

that S-Register.

S0 rings 0, 1255 1 Sets the number of rings before

the modem answers. ATS0=0

disables auto-answer complete-

ly.

S1 rings 0255 0 Counts the number of rings that

have occurred.

S2 decimal 0255 43 (+) Sets ASCII code for the escape

character. Values greater than

127 disable the escape sequence.

S3 decimal 0127 13 (^M) Sets ASCII code for the carriage

return character.

S4 decimal 0127 10 (^J) Sets ASCII code for the line feed

character.

S5 decimal 0255 8 (^H) Sets ASCII code for the backspace

character. Values greater than 32

disable the backspace character.

S6 seconds 2255 2 Sets the time the modem waits

after it goes off-hook before it

begins to dial the telephone num-

ber.

S7 seconds 1255 50 Sets the time the modem waits

for a carrier signal before abort-

ing a call. Also sets the wait for

silence time for the @ dial modi-

fier.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 83 84

Brak uwag

Multi-tech-systems MT5600ZDX Instrukcja Użytkownika Strona 44