Multi-tech-systems MVP400 Instrukcja Użytkownika Strona 60
- Strona / 64
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
MultiVOIP Quick Start Guide
60
FXSE&M
FXO
PSTN
Ethernet Connection
Power Connection
10BASET
ETHERNET
POWER
Voice/Fax Channel
Connections
E&M
FXO
FXS
Figure 5. Remote Site Cable Connection
3. Connect a network cable to the ETHERNET 10BASET
(RJ-45) connector on the back of your MultiVOIP 400/800.
4. If you are connecting a station device (analog telephone,
fax machine, or Key Telephone System (KTS) to your
MultiVOIP 400/800, connect the smaller end of a special
adapter cable (supplied) to the Voice/Fax Channel 1 FXS
connector on the back of the MultiVOIP 400/800 and the
other end to the station device.
If you are connecting a PBX extension to your MultiVOIP
400/800, connect the smaller end of a special adapter
cable (supplied) to the Voice/Fax Channel 1 FXO
connector on the back of the MultiVOIP 400/800 and the
other end to the PBX extension.
If you are connecting an E&M trunk from a telephone
switch to your MultiVOIP 400/800, connect one end of an
RJ-45 phone cord to the Voice/Fax Channel 1 E&M
connector on the back of the unit and the other end to the
trunk phone jack.
If you are connecting to an E&M trunk, you need to ensure
that the E&M trunk jumper is in the correct position for the
E&M type trunk. The default E&M jumper position is E&M
type 2. To change the E&M jumper position, perform the
E&M jumper block positioning procedure.
- Standalone Voice/IP Gateway 1
- Model MVP400 and MVP800 1
- H.323 Mode 1
- Quick Start Guide 1
- Contents 3
- Introduction 4
- Related Documentation 5
- Installing Your MultiVOIP 6
- Unpacking Your MultiVOIP 8
- Safety Warnings 8
- Cabling Procedure 9
- 2 (Default) 11
- Configuring the MultiVOIP 45
- 800s” section 45
- check box to enable 47
- Deploying the VOIP Network 59
- Remote Site Administrator 59
- Ethernet Connection 60
- Power Connection 60
- Limited Warranty 62
- Technical Support 63
- FCC Declaration 63
- 82088202 64
Powiązane produkty i podręczniki dla Sprzęt komputerowy Multi-tech-systems MVP400
(123 strony)Behringer Europower PMP960M manuels
Manuels d'utilisation et guides de l'utilisateur pour Mélangeurs Behringer Europower PMP960M.
Nous fournissons des manuels en pdf 2 Behringer Europower PMP960M à télécharger gratuitement par type de document : Manuel de l'utilisateur
Komentarze do niniejszej Instrukcji