Multi-Tech Systems ISI5634PCI/4/8 Instrukcja Użytkownika Pobierz pdf (Strona 69)

Chapter 3—Software/Driver Installation

RPM, you will need to use the --force option in the RPM command as

in step 5b below.

5a. For RPM version 6.2:

Copy the RPM to a temporary folder. In this example, well use /isi.

Installation is in three parts, building the isicom-smp.spec file from

the source file, then building the actual RPM from that spec file, and

finally, installing the RPM. Do not type the quotation marks shown in

the commands below.

- Run rpm -i /isi/isicom-1.1-3.src.rpm.

- Run rpm -ba /usr/src/redhat/SPECS/isicom-

smp.spec.

- Run rpm -ihv /usr/src/redhat/RPMS/i386/isicom-

1.1-3.i386.rpm

- Reboot the system, either using the command init 6 <ENTER>

or your favorite method.

5b. For RPM version 7.0:

Copy the RPM to a temporary folder. In this example, well use /isi.

Installation is in three parts, building the isicom-smp.spec file from

the source file, then building the actual RPM from that spec file, and

finally, installing the RPM. Do not type the quotation marks shown in

the commands below. Replace the x below with the actual version

numbers being used.

- Run rpm -i /isi/isicom-1.2-3.src.rpm.

- Run rpm -ba /usr/src/redhat/SPECS/isicom-

rh7.spec.

- Run rpm -ihv --force /usr/src/redhat/RPMS/

i386/isicom-1.2-3.i386.rpm.

- Reboot the system, using either the command init 6 <ENTER>

or your favorite method.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 121 122

Brak uwag

Multi-Tech Systems ISI5634PCI/4/8 Instrukcja Użytkownika Strona 69