Multi-tech-systems 40-01459-D0-001 Instrukcja Użytkownika Strona 22
- Strona / 63
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
16 PCI ESCON Adapter Installation Guide
Finally, using both ESCON Directors and EMIF, it is possible for a single ESCON
controller to communicate with multiple Logical Partitions (LPARs) running on
multiple mainframes, using multiple ESCON channels.
Because an ESCON controller may be attached to an ESCON director, which may be
connected to multiple mainframes and Logical Partitions (LPARs), it is necessary to
configure the ESCON controller in order to define how the unit will appear to each
environment.
The following information needs to be configured for each logical connection that is
to be supported across the physical ESCON cable:
Device Address – The Sub-Channel address for the device, ranging in value from
00-FF hexadecimal. This address should match that coded in the UNITADD
parameter of the CNTLUNIT macro in the IOCDS. Sub-channel addresses must
be unique across any one partition.
For IBM Communications Server, Microsoft Host Integration Server, Microsoft
SNA Server, or Bus-Tech TN3270E Server a unit address must be configured for
each PU defined in the gateway. These addresses must be coded with
UNIT=3174 in the CNTLUNIT macro of the IOCDS.
For Bus-Tech TCP/IP Passthrough and TCP/IP Direct Connect two adjacent unit
addresses must be defined for each connection. These device addresses must be
coded as UNIT=3088 or UNIT=SCTC in the CNTLUNIT macro in the IOCDS.
For TCP/IP Passthrough the first address of the pair must always be even
numbered; for example: 12-13, 8A-8B, etc.
For MPC+ two or more unit addresses must be defined. These device addresses
must be coded as UNIT=SCTC.
EmulationType – The type of IBM controller this device is to emulate (look like)
to the mainframe. Valid types are "3174" for SNA Gateways (Host Integration
Server, SNA Server, or Communications Server), GENERIC" for TCP/IP
Passthrough, and “MPC” for TCP/IP Direct Connect and MPC+ for Windows.
Control Unit – The control unit address the mainframe will use to communicate
with the controller and the controller will use to identify itself to the mainframe.
Control Unit Address is a hexadecimal number ranging from 0-F. This number
must match that coded in the CUADD parameter of the CNTLUNIT macro in the
IOCDS. Note that CUADD is an optional field in the IOCDS and defaults to zero
(0) if not coded.
- PCI ESCON A 1
- Table of Contents 3
- About This Publication 5
- What’s New in this Release? 6
- Chapter 1. INTRODUCTION 7
- Related Documentation 8
- Minimum System Requirements 9
- ARDWARE INSTALLATION 11
- RIVER INSTALLATION 13
- Figure 3-2. Search the Floppy 14
- Driver Installation 9 15
- Windows NT 16
- Driver Installation 11 17
- Driver Installation 13 19
- ONFIGURATION 21
- CNTLUNIT ...,LINK=(02) 23
- Configuration 24
- ESCON Configuration 19 25
- (See Figure 4-4) 25
- Figure 4-7. Add Device Dialog 26
- IRECT CONNECT 29
- Windows 2000 30
- Figure 5-9. TCP/IP Properties 33
- Figure 5-10. Removing a Link 34
- Figure 5-14.Insert Disk 37
- Figure 5-18. Adapter Bindings 39
- TCP/IP Direct Connect 35 41
- Link Configuration 42
- Mainframe Configuration 44
- IOCDS – LPAR 0 46
- TCP/IP Profile – LPAR 1 46
- TCP/IP Profile – LPAR 0 46
- IOCDS – LPAR 1 46
- TCP/IP Routing 47
- TCP/IP Direct Connect 45 51
- Chapter 6. TROUBLESHOOTING 53
- ESCON Configuration 55
- TCP/IP Direct Connect 57
- Help and Service Information 59
- Step 3: Placing the Call 60
- Customer Response 61
- Technical Specifications 63
Powiązane produkty i podręczniki dla Sprzęt komputerowy Multi-tech-systems 40-01459-D0-001
(2 strony)Behringer Europower PMP960M manuels
Manuels d'utilisation et guides de l'utilisateur pour Mélangeurs Behringer Europower PMP960M.
Nous fournissons des manuels en pdf 2 Behringer Europower PMP960M à télécharger gratuitement par type de document : Manuel de l'utilisateur
Komentarze do niniejszej Instrukcji