Multi-tech-systems MT5600DSVD Instrukcja Użytkownika Strona 34
- Strona / 82
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
MultiModemDSVD User Guide 4 AT Commands, S-Registers, and Result Codes
29
Command: &C
n
Data Carrier Detect (DCD) Control
Values: n = 0 or 1
Default: 1
Description: &C0 Forces the DCD circuit to always be high.
&C1 DCD goes high when the remote modem’s carrier signal is de-
tected, and goes low when the carrier signal is not detected.
Command: &D
n
Data Terminal Ready (DTR) Control
Values: n = 0, 1, 2, or 3
Default: 2
Description: This command interprets the high to low transition of the DTR
signal from the computer according to the supplied parameter.
The action taken depends on the current &Q setting.
&D0 &Q0, &Q5, &Q6: DTR is ignored (assumed high). Allows op-
eration with computers that do not provide DTR.
&D1 &Q0, &Q5, &Q6: DTR drop is interpreted by the modem as if
the asynchronous escape sequence had been entered. The mo-
dem returns to asynchronous command state without discon-
necting.
&D2 &Q0–&Q6: DTR drop causes the modem to hang up. Autoan-
swer is inhibited.
&D3 &Q0, &Q5, &Q6: DTR drop causes the modem to perform a
soft reset as if the Z command were received. The &Y setting de-
termines which profile is loaded.
&Q5 or &Q6 and +FCLASS=1 or +FCLASS=2: Same as for &Q0.
Note: If &D1, &D2, or &D3 is set, the modem will not dial
without a DTR drop.
Command: &E
n
V.42 Error Correction Modes
Values: n = 0, 1, or 2
Default: 1
Description: &E0 V.42 non-error correction mode (V.42 disabled).
&E1 V.42 auto-reliable mode.
&E2 V.42 reliable mode (V.42 enabled).
Command: &E
n
Modem-Initiated Flow Control
Values: n = 3, 4, or 5
Default: 4
Description: &E3 Flow control disabled.
&E4 CTS/RTS hardware flow control.
&E5 XON/XOFF software flow control.
Note: See also the L5 and &K commands.
- Chapter 1: Introduction 3
- Chapter 2: Installation 3
- Chapter 3: Operation 3
- Contents 4
- MultiModemDSVD User Guide 4
- Product Description 7
- Features 7
- Related Manuals 9
- Installation 10
- Introduction 11
- What You Will Need 11
- Safety Warnings 11
- Step 1: Mount the Feet 12
- Changing the Speaker Jumper 13
- RS232 Connection 14
- Line Connection 14
- Installing the Modem Driver 16
- Operation 18
- Front Panel 19
- Configuring the Modem 20
- Connecting to the Internet 20
- Dial-Up Networking 21
- Fax Operation 24
- Voice Operation 24
- References 26
- AT Commands 27
- S-Registers & 27
- Result Codes 27
- AT Command Summary 29
- Voice Commands 44
- S-Registers 46
- Problems 53
- None of the Indicators Light 54
- Data Is Being Lost 58
- Appendixes 60
- FCC Part 68 Telecom 61
- FCC Part 15 62
- Industry Canada 62
- Fax Branding Statement 63
- Canadian Limitations Notice 63
- South African Notice 65
- Appendix C: Loopback Tests 69
- Test procedure 70
- NTER to bring your modem into 72
- Technical Support 73
- Internet Sites 75
- Ordering Accessories 75
- Upgrade Overview 76
- NTER to list your 78
Powiązane produkty i podręczniki dla Sprzęt komputerowy Multi-tech-systems MT5600DSVD
(85 strony)Behringer Europower PMP960M manuels
Manuels d'utilisation et guides de l'utilisateur pour Mélangeurs Behringer Europower PMP960M.
Nous fournissons des manuels en pdf 2 Behringer Europower PMP960M à télécharger gratuitement par type de document : Manuel de l'utilisateur
Komentarze do niniejszej Instrukcji